2004
FIELD
MANUAL
OF THE
A.A.R.
INTERCHANGE
RULES
The drawings should be replaced with drawing of the improved gages.
These application drawings should be replaced with drawings that use the improved wheel gages.
These application drawings should be replaced with drawings that use the improved wheel gages.
Page 262
Delete these drawings, they are not even of the former standard. Drawings of the current Standard measuring high flange would appropriately demonstrate use of former Standards.
Replace these application drawings with drawings depicting the SIMPLIFIED STEEL WHEEL GAGE with all appropriate rim thickness measurements and an improved COMBINED GAGE.
Replace these application drawing of SIMPLIFIED STEEL WHEEL gage measuring ¾ inch rim thickness with drawing showing improved SIMPLIFIED STEEL WHEEL GAGE. Delete drawing of former Standard, and replace with current Standard which
depicts measurement for both.
Standard Steel Wheel Gage moved to page 266. Use space to show improved SIMPLIFIED STEEL WHEEL GAGE measuring 7/8 inch rim thickness. Provide application drawing showing improved COMBINED GAGE measuring ¾ inch rim thickness.
Delete old application drawings and replace with drawings of the improved COMBINED GAGE and the new Standard STEEL WHEEL GAGE measuring 7/8 inch rim thickness.
Remove application drawings and replace with drawings showing the improved WHEEL DEFECT GAGE and improved COMBINED WHEEL GAGE measuring Slid Flats.
Page 294
Delete gage drawing. The drawings on the following page work fine for the former Standards.
Page 296
Delete gage drawing, the gage depicted is not even the former Standard, but a distant former Standard. The drawing using the current Standard on the previous page will work fine for all former Standards.
Replace application drawing with COMBINED WHEEL GAGE with drawing without notches.