WINCHESTER
INDUSTRIES, INC.
WINCHESTER BUSINESS PARK
P.O. BOX 917, 106 GROPPO
DRIVE, WINSTED, CT 06098-0917
TELEPHONE
(860) 379-5336 FAX (860) 379-6678
|
|
WINCHESTER
INDUSTRIES, INC. |
|||
|
|
||||
Click
here to go to download the latest Acrobat Reader to see and print drawings
Click on GAGE Number to see drawing.
|
GAGE
NO. |
REV |
DESCRIPTION |
|
|
|
|
| W2 | A | WINCHESTER BALL CAP |
| 1-8983 THIS GAGE NOT REQUIRED SEE LARRY DAVIS LETTER IN M-214 SECTION OF WEBSITE | ||
| W201A | B |
STEEL WHEEL GAGE STANDARD S-630-98 (MODIFIED) TO PROVIDE CLEARANCE FOR DISC BRAKES |
| W201-1A | A |
STEEL WHEEL GAGE STANDARD S-630-98 (MODIFIED) TO PROVIDE CLEARANCE FOR DISC BRAKES LESS CLEARANCE THAN PROVIDED BY W201A |
| W205-2 | F |
DIRECT READING STEEL WHEEL GAGE NORFOLK SOUTHERN DRAWING 52-C-112 REV A MODIFIED BY WINCHESTER FOR FUNCTION |
| W206 | A | DRAFT POCKET GAGE (24 5/8") |
| W209 | B |
STEEL WHEEL GAGE STANDARD S-630-98 MODIFIED FOR VIA RAIL |
| W211 | C |
THRUST LUG HEIGHT GAGE EC-1091 MSRP D RP-321-91 |
| W212 | E |
PEDESTAL THRUST LUG GAGE MSRP D RP-321-91 |
| W236 | C |
SWIVEL BUTT COUPLER REAR WALL GAGE AAR FIELD MANUAL RULE 17 & RULE 18 |
| W245 | D |
COUPLER REAR WALL KEY SLOT AAR FIELD MANUAL RULE 16 |
| W275 | B |
SIMPLIFIED STEEL WHEEL GAGE (MODIFIED) UNION PACIFIC RR SPECIFICATION |
| W286 | A |
PIN HOLE GAGE ATCHINSON TOPEKA & SANTA FE RAILWAY DRAWING 2-A-59-104447 |
| W287 | A |
TRUCK SPRING LIMIT WEAR GAGE UNION PACIFIC SPECIFICATION FOR AAR FIELD MANUAL RULE 50 |
| W288 |
HITCH PLUNGER INSPECTION GAGE TTX DRAWING B-1033 REV E |
|
| W290 | B |
SETUP AND INSPECTION GAGE FOR STUCKI CONSTANT CONTACT SIDE BEARINGS |
| W291 | A | SIMPLIFIED TRAINLINE GLADHAND GO/NO-GO GAGE |
| W294 | A |
TRUCK-BARBER-SWING MOTION BOLSTER SLOPE POCKETS GAGE TTX DRAWING C-10143 REV H |
| W298 | C |
COLUMN SIDES GO/NO-GO GAGE TTX DRAWING D-10199 REV D |
| W300 | A | LIMIT WEAR GAGE FOR CHECKING MAXIMUM FLANGE THICKNESS, HEIGHT AND THROAT RADII FOR UNI-POINT WHEEL (FT-2335) |
| W301 | A | MAXIMUM FLANGE THICKNESS, HEIGHT & THROAT RADII GAGE FOR UNI-POINT STEEL WHEELS (FT-2335) |
| W302 | A | MINIMUM FLANGE THICKNESS, HEIGHT & THROAT RADII GAGE FOR UNI-POINT STEEL WHEELS (FT-2335) |
| W303 | A |
LIMIT WEAR GAGE FOR CHECKING MINIMUM FLANGE THICKNESS, HEIGHT AND THROAT RADII FOR UNI-POINT STEEL WHEEL (FT-2335) |
| W304 | C | MASTER GAGE FOR VERIFYING W635 (44057) |
| W305 | B | MASTER GAGE FOR VERIFYING W636 (49822) |
| W306 | C | MASTER GAGE FOR VERIFYING W676 (25623-1 |
| W307 | B | MASTER GAGE FOR VERIFYING W681 (47120-2) |
| W308 | C | MASTER GAGE 35792-2 FOR VERIFYING W602 (28393) |
| W309 | B |
MASTER GAGE FOR W750 (32600) CANADIAN PACIFIC DRAWING 60-C-343 |
| W315 | A | G.E. RAILCAR REPAIR GAGE FOR MEASURING COMBINED WEAR ON RIDE CONTROL FRICTION SHOES |
| W316 | B |
NARROW FLANGE 1B LOCOMOTIVE
PROFILE WIDTH GO/NO-GO GAGE |
| W319-1 | A | WHEEL DIAMETER GAGE |
| W319-2 | C | WHEEL DIAMETER GAGE MODIFIED FOR CANADIAN NATIONAL RR |
| W320 | ||
| W323 | A | 1.25 INCH FILLET GAGE |
| W323-1 | A | MASTER GAGE FOR 1.25 INCH FILLET GAGE (W323) |
| W323-2 | A | 3 INCH FILLET GAGE |
| W323-3 | A | 4.5 INCH FILLET GAGE |
| W323-4 | A | 1.00 INCH FILLET GAGE |
| W323-5 | A | MASTER GAGE FOR 1" FILLET GAGE |
| W323-6 | A | MASTER GAGE FOR 3" RADIUS GAGE |
| W324 | A |
KEYSTONE INSPECTION AND
MAINTENANCE PROCEDURE DRAWING 2-C-4915 GAGE NUMBER 4915 |
| W343 | A | MASTER GAGE FOR BACK TO BACK MOUNTING GAGE W783 |
| W343-1 | A | STANDARD FOR "U" DIMENSION GAGES |
| W344 | A | GAUGE #3 TO BE USED FOR CONDEMNING SIDE SPRINGS |
| W356 | E | WHEEL DIAMETER GAGE (40, 42, 45 INCH DIAMETER WHEELS) |
| W365 | A |
SIDE FRAME CEILING WEAR GAGE CSX SPECIAL GAGE NO. TRK-SF-PED |
| W366-1 | B |
C PEP GAGE STANDARD CAR TRUCK CO. DRAWING SK-1655 |
| W366-2 | B | SIDE BEARING LOCATION GAGE |
| W368 | B |
THRUST LUG NO-GO GAGE WITH HANDLE CIRCULAR LETTER C-10391 AND C-10441 |
| W375-1 | A |
TRUCK TEAR DOWN LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE |
| W375-2 | A |
TRUCK TEAR DOWN LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE |
| W375-3 | A |
TRUCK TEAR DOWN LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE |
| W375-4 | A |
TRUCK TEAR DOWN LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE |
| W375-5 | A |
TRUCK TEAR DOWN LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE |
| W375-6 | A |
TRUCK TEAR DOWN LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE |
| W375-7 | A |
TRUCK TEAR DOWN
LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE 70 & 100 TON RIDE CONTROL TRUCK |
| W375-8 | A |
TRUCK TEAR DOWN LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE SUPER SERVICE RIDE CONTROL TRUCK |
| W375-9 | A |
TRUCK TEAR DOWN LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE |
| W375-10 | A |
TRUCK TEAR DOWN LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE |
| W375-11 | A |
TRUCK TEAR DOWN
LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE 125 TON RIDE CONTROL D3 SPRINGS |
| W375-12 | A |
TRUCK TEAR DOWN
LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE 70 & 100 TON RIDE MASTER |
| W375-13 | A |
TRUCK TEAR DOWN LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE 70 & 100 TON RIDE MASTER WITH 1992 SLOPEGUARD SHOES |
| W375-14 | A |
TRUCK TEAR DOWN LIMITS BNSF "GO - NO GO" FRICTION CASTING SHOE GAGE |
| W380 | A | DISC THICKNESS GAGE |
| W388 | F | SPALL GAGE, BRAKE GAGE, COUPLER GAGE, SAFETY ACCEPTANCE GAGE, SLID FLAT GAGE & SHELL TREAD GAGE |
| W392 | A |
BRAKE ROD WEAR GAGE CANADIAN NATIONAL RAILWAY |
| W401 | F | TREAD WORN HOLLOW GAGE |
| W401D6 | B | FOUR (4) STANDARD FOR TREAD WORN HOLLOW GAGE (W401) |
| W403-1 | B |
SPLIT WEDGE CONDEMNING GAGE SK-2046 905-SW
915-SW 925-SW 955-SW STANDARD CAR TRUCK DRAWING SK-2046 REV B |
| W403-2 | A | SPLIT WEDGE CONDEMNING GAGE SK-2063 945-SW 965-SW |
| W404-1 | B | SPLIT WEDGE CONDEMNING GAGE SK-2050 915-SW |
| W404-2 | A | SPLIT WEDGE CONDEMNING GAGE SK-2045 925-SW |
| W404-3 | A | SPLIT WEDGE CONDEMNING GAGE SK-2054 905-SW |
| W404-4 | A | SPLIT WEDGE CONDEMNING GAGE SK-2058 955-SW |
| W404-5 | A | SPLIT WEDGE CONDEMNING GAGE SK-2062 945-SW |
| W404-6 | A | SPLIT WEDGE CONDEMNING GAGE SK-2270 965-SW |
| W407 | B |
CENTERING GAGE 945-SW INSERT STANDARD CAR TRUCK COMPANY DRAWING SK-2041 A |
| W408 | B |
ELEVATION GAGE 945-SW INSERT STANDARD CAR TRUCK DRAWING SK-2042 REV B |
| W410 | A | HANGERLESS BRAKE BEAM GAGE Standard S-360-79 |
| W421 | B |
DRAFT GEAR POCKET GAGE CANADIAN NATIONAL RR DRAWING 1tC-3298-A REV A |
| W425-1 | A |
NOZZLE FLANGE GASKET GROOVE GAGE UNION TANK CAR CO. DRAWING A-94-73 |
| W425-2 | A |
SILVER DOLLAR GASKET TONGUE GAGE UNION TANK CAR CO. DRAWING A-94-73 |
| W426 | B |
DIESEL AXLE WHEEL SEAT TO GEAR MAX DIMENSION CANADIAN NATIONAL DRAWING 3TM-4544-A REV A |
| W427 | A |
NATIONAL ARTICULATING CONNECTOR
TEMPLATE FOR MODIFYING PRE-92 MALE CONNECTOR PULL STOPS TO CURRENT DESIGN ABC NACO DRAWING 53169 |
| W428 | B |
ARTICULATED CONNECTOR GAGE TTX DRAWING D-11602 REV E |
| W429 | A |
ELEVATION GAGE 965-SW INSERT STANDARD CAR TRUCK COMPANY DRAWING SK-2165 |
| W432 | A |
SIDE BEARING CLEARANCE GAGE UNION PACIFIC RAILROAD SPECIFICATION |
| W437 | A |
TRIPPER GAGE PORT AUTHORITY TRANS-HUDSON CORP DRAWING SKMOO-12 |
| W439 | A |
NATIONAL A-P TIGHTLOCK COUPLER ALIGNING WING LIMIT GAGE ABC-NACO DRAWING 53255 GAGE NUMBER 53255-1 |
| W440 | A |
NATIONAL A-P COUPLER KNUCKLE NOSE WEAR AND STRETCH LIMIT GAGE ABC-NACO DRAWING 53253 GAGE NUMBER 53253-1 |
| W441 | A | 133LB RAIL D-BAR PROFILE GAGE |
| W442 | A | 136LB RAIL D-BAR PROFILE GAGE |
| W446 | A |
INDUSTRIAL EQUIPMENT WILLISON AUTOMATIC COUPLER GAGE CONTOUR HEAD AND LOCK
CONDEMNING LIMIT ABC-NACO DRAWING 47419 REV A GAGE NUMBER 47419-1 |
| W449 | A |
BOMBARDIER STEEL WHEEL GAGE DRAWING BSK-12053-1 FOR PROFILE 414-9NW1 KUALA LUMPUR |
| W450 | A |
GAGE NO. 2 FOR SELECTION OF SECOND HAND SPRINGS CANADIAN NATIONAL RR DRAWING 3H-34858 |
| W451 | B |
BARBER 905-SW SPLIT WEDGE ELEVATION GAGE STANDARD CAR TRUCK DRAWING SK-1776 REV B |
| W452 | B |
BARBER 905-SW SPLIT WEDGE INSERT CENTERING GAGE STANDARD CAR TRUCK DRAWING SK-1777 REV B |
| W455 | A | WHEEL DIAMETER GAGE |
| W456-1 | A | NORFOLK SOUTHERN CENTER PLATE RECONDITIONED GAGE 14 INCH |
| W456-2 | A | NORFOLK SOUTHERN CENTER PLATE RECONDITIONED GAGE 16 INCH |
| W457-1 | D |
SLOPE TEMPLATE SPLIT WEDGE TRUCK DROP-IN WORN POCKET ACCEPTANCE GAGE PENNSY DRAWING IN 2234 |
| W457-2 | B |
POCKET WIDTH TEMPLATE SPLIT WEDGE TRUCK DROP-IN WORN POCKET ACCEPTANCE GAGE PENNSY DRAWING PN 2048 |
| W459 | A |
NATIONAL ARTICULATED CONNECTION RECONDITIONING OF PULL STOP SURFACE OF
MALE CONNECTORS ABC-NACO DRAWING 52734 GAGE NUMBER 52734-1 |
| W462 | A |
INSPECTION/MAINTENANCE NATIONAL ARTICULATED CONNECTION BUSHING WEAR GAGE ABC-NACO DRAWING 52659 |
| W463 | A |
SELF-CENTERING SURFACE GAGE (3 7/8 RADIUS) & (4 1/8 RADIUS) LEWIS BOLT & NUT COMPANY DRAWING HXTW8-SJ3 |
| W466 | A | XC-R BOLSTER GAGE 6 1/2 X 12 |
| W467-1 | B | TALGO BRAKE PAD GAGE (.250 INCHES) |
| W467-2 | B | TALGO BRAKE PAD GAGE (.335 INCHES) |
| W469 | A | NO GO GAGE FOR BRAKE SHOE STANDARD S-362-79 |
| W470 | A | GO GAGE FOR BRAKE SHOE STANDARD S-361-78 |
| W471 | A |
SIDE FRAME COLUMN GAGE SUPER SERVICE RIDEMASTER® ASF® DRAWING 1-9211 |
| W472 | A |
POCKET CONSTRUCTION POINT GAGE SUPER SERVICE RIDEMASTER® BOLSTER ASF® DRAWING 1-9203 |
| W473 | A |
GAGE FOR BOLSTER GIB RESTORATION SUPER SERVICE RIDEMASTER® BOLSTER AMERICAN STEEL FOUNDRIES DRAWING 1-9205 |
| W474 | A |
COLUMN OUTER LAND SURFACE GAGE SUPER SERVICE RIDEMASTER® BOLSTER AMERICAN STEEL FOUNDRIES DRAWING 1-9206 |
| W475 | A |
OUTER GIB CONTOUR GAGE SUPER SERVICE RIDEMASTER® BOLSTER AMERICAN STEEL FOUNDRIES DRAWING 1-9209 |
| W476 | A |
COLUMN INNER LAND SURFACE GAGE SUPER SERVICE RIDEMASTER® BOLSTER AMERICAN STEEL FOUNDRIES DRAWING 1-9207 |
| W477 | A |
POCKET EXTENSION AND POCKET INSERT GAGE STANDARD CAR TRUCK DRAWING SK-2670 REV NONE |
| W478 | A |
POCKET INSERT CONDEMNING GAGE 905-SW SPLIT WEDGE STANDARD CAR TRUCK COMPANY DRAWING SK-2056 REV NONE |
| W480 | B |
37 1/2 DEGREE SURFACE CONTOUR GAGE SUPER SERVICE RIDE MASTER BOLSTER AMERICAN STEEL FOUNDRIES DRAWING 1-9201 |
| W481 | B |
M-7 WHEEL DIAMETER GAGE LONG ISLAND RAILROAD |
| W491 | A |
SPLIT WEDGE HCX BOLSTER POCKET RESTORATION GAGE PENNSY DRAWING PN 2128 |
| W505 | A |
POCKET INSERT CONDEMNING GAGE 945-SW SPLIT WEDGE BARBER ®DRAWING SK-2065 |
| W506-1 | A |
SIDEWALL RESTORATION GAGE (LOWER RESTORATION) BARBER® DRAWING SK-2044 REV B |
| W506-2 | A |
SIDEWALL RESTORATION GAGE (UPPER RESTORATION) BARBER® DRAWING SK-2044 REV B |
| W507 | B |
GIB RESTORATION GAGE S-2-E BARBER® DRAWING SK-2264 REV A |
| W508 | A |
SIDE FRAME COLUMN REPAIR GAGE FOR S-2-E BARBER® DRAWING SK-2265 |
| W510 | A |
BUTT WIDTH GAGE No. 50052-2 MCSCM DRAWING 50052 REV A |
| W519 | A |
SPLIT WEDGE BOLSTER POCKET RESTORATION GAGE PENNSY DRAWING PN 1504 |
| W520 | A |
REDUCED SIZE WILLISON AUTOMATIC COUPLER GAGE CONTOUR HEAD AND LOCK CONDEMNING LIMIT NATIONAL CASTINGS DRAWING 49554 GAGE 49554-1 |
| W521 | A |
UPPER & LOWER SIDE WALL RESTORATION GAGES S-2-M STANDARD CAR TRUCK DRAWING SK-2504 PRELIMINARY RELEASE |
| W522 | A |
BARBER BOLSTER GIB RESTORATION GAGE S-2-M STANDARD CAR TRUCK DRAWING SK-2505 PRELIMINARY RELEASE |
| W523 | A |
REPAIR GAGE FOR S-2-M SIDE FRAME COLUMNS STANDARD CAR TRUCK DRAWING SK-2506 PRELIMINARY RELEASE |
| W524 | A |
MODIFIED TTX EARLY REMOVAL GAGE TTX DRAWING C-10778 REV D MODIFIED BY WINCHESTER |
| W529 | A |
CONDEMNING GAGE POCKET INSERT 915-SW SPLIT WEDGE STANDARD CAR TRUCK DRAWING SK-2052 |
| W530 | C |
SIDEWALL RESTORATION GAGES STRAIGHT WALL APPLICATION STANDARD CAR TRUCK DRAWING SK-2546 REV B SUPERSEDES SK-2142 (W991) |
| W531 | A |
HITCH "D" BUSHING-HOOK HOLD DOWN NO-GO GAGE APPLIES TO ACF MODEL 5 TTX DRAWING A-2266 REV D |
| W533 | B |
ELEVATION GAGE 925-SW INSERT STANDARD CAR TRUCK DRAWING SK-2573 REV NONE |
| W534 | A |
REPAIR GAGE FOR S-2-C 5 1/2 X 10 SIDE FRAME COLUMNS FOR SPLIT WEDGE STANDARD CAR TRUCK DRAWING SK-2575 REV NONE |
| W535 | A |
STABILIZER WEAR GAGE STANDARD CAR TRUCK DRAWING SK-2576 REV NONE |
| W536 | A |
BOLSTER INNER GIB GAGE SUPER SERVICE RIDEMASTER BOLSTER AMERICAN STEEL FOUNDRIES DRAWING 1-9223 |
| W537 | A |
REPAIR GAGE FOR S-2-E 6 1/2 X 12 SIDE FRAME COLUMNS STANDARD CAR TRUCK DRAWING SK-2548 |
| W538 | A |
REPAIR GAGE FOR S-2-E 6 1/2 X 12 SIDE FRAME COLUMNS STANDARD CAR TRUCK DRAWING SK-2524 |
| W539 | A |
SLOPEWALL RESTORATION GAGE S-2-E BARBER STABILIZED TRUCKS STANDARD CAR TRUCK DRAWING SK-2527 REV NONE |
| W548 | A |
TF-880 HOUSING TAPERED BORE GAGE A. STUCKI COMPANY DRAWING 07494 |
| W549 | A |
THRUST LUG GAGE FOR 6 1/2 X 9 & 6 1/2 X 12 NARROW PEDESTAL S-286 / M-976 RETROFIT ASF - KEYSTONE, INC. DRAWING 1-9270 REV C |
| W550 | A |
BOMBARDIER STEEL WHEEL GAGE DRAWING NUMBER BSK-12627-1 |
| W550-1 | A |
BOMBARDIER STEEL WHEEL GAGE DRAWING BSK-13316-1 |
| W555 | A |
BEARING SEAT LOCATION AND JOURNAL FILLET GAGE L JOURNAL 6 X 8 TTX COMPONENT SPECIFICATION 68-92-020805 |
| W556 | A |
BEARING SEAT LOCATION AND JOURNAL FILLET GAGE M JOURNAL 7 X 9 TTX COMPONENT SPECIFICATION 68-92-020805 |
| W557 | A |
SIDEWALL RESTORATION GAGES ANGLED WALL APPLICATION STANDARD CAR TRUCK DRAWING SK-2547 |
| W558 | A | ASK-SUPER SERVICE RIDEMASTER SIDE FRAME COLUMN SPACING & ALIGNMENT GO GAGE 100/110 TON CAPACITY ASF DRAWING 1-9212 |
| W559 | A | ASK-SUPER SERVICE RIDEMASTER SIDE FRAME COLUMN SPACING & ALIGNMENT NO-GO GAGE 100/110 TON CAPACITY ASF DRAWING 1-9213 |
| W561-1 | A |
FRICTION CASTING GAGE FOR 609-D STANDARD CAR TRUCK DRAWING SK-766 REV G |
| W561-2 | A |
FRICTION CASTING CAGE FOR 678-C & 787-C STANDARD CAR TRUCK DRAWING SK-766 SHEET 2 REV D |
| W561-3 | A | FRICTION CASTING GAGE FOR 678-B & 787-B |
| W562 | B |
FRICTION CASTING WIDTH GAGE STANDARD CAR TRUCK DRAWING SK-1065 REV F |
| W563 | A |
CONDEMNING GAGE POCKET INSERT 925-SW SPLIT WEDGE STANDARD CAR TRUCK DRAWING SK-2048 REV NONE |
| W565 | B | GAGE 41897 |
| W567 | A | THRUST LUG WIDTH GO GAGE FOR ROADMASTER RETRO-FIT PEDESTAL SIDE FRAME AMERICAN STEEL FOUNDRIES DRAWING 99207 REV A |
| W568 | A |
GO AND NO-GO GAGE NARROW PEDESTAL 100 TON SIDE FRAME AMERICAN STEEL FOUNDRIES DRAWING 97707 REV L |
| W569 | A |
SIDE BEARING BASE WIDTH GAGE 3800LT, 4500LT, 5600LT AMERICAN STEEL FOUNDRY DRAWING 1-9271 REV A |
| W570 | A |
SIDE BEARING BASE AND CAP WALL THICKNESS GAGE 3800LT, 45000LT, 5600LT AMERICAN STEEL FOUNDRIES DRAWING 1-9272 REV A |
| W571 | A | RAIL GRIND GAGE |
| W572-1 | D | MBTA WHEEL GAGE |
| W573 | A |
AXLE OVERALL LENGTH GAGE AAR MRSP G-II FIGURE 4.2 |
| W576 | D |
JOURNAL W DIMENSION GAGE AAR G-II Fig.4.4 & 4.1 |
| W579 | B |
POCKET WIDTH GAGE SIDE WALL WEAR PLATE RETROFIT STANDARD CAR CO DRAWING SK-2848 REV A |
| W580 | A |
POCKET WIDTH GO & NO GO GAGE S-2-C WITH SIDE WALL WEAR PLATES STANDARD CAR TRUCK CO DRAWING SK-2852 REV NONE |
| W581 | A | POCKET WIDTH GO & NO GO GAGE S-2-HD & S-2-HD-9C WITH SIDE WALL WEAR PLATES STANDARD CAR TRUCK CO DRAWING SK-2853 REV NONE |
| W582 | A |
GIB RESTORATION GAGE BARBER STABILIZED TRUCK S-2-HD & S-2-HD-9C STANDARD CAR TRUCK CO DRAWING SK-2480 REV A |
| W584 | A |
SLOPE SURFACE CONSTRUCTION GAGE "AS CAST" BOLSTER POCKETS STANDARD CAR TRUCK CO DRAWING SK-2855 REV NONE |
| W585 | A |
SPRING SEAT PERPENDICULARITY GAGE STANDARD CAR TRUCK CO. DRAWING SK-2827 REV NONE |
| W586 | A |
SPRING POCKET CLEARANCE AND HEIGHT GAGE STANDARD CAR TRUCK CO. DRAWING SK-2829 REV NONE |
| W587 | A |
WING THICKNESS "GO" & "NO-GO" GAGE STANDARD CAR TRUCK CO DRAWING SK-2828 REV NONE |
| W588 | A |
SIDE WALL WIDTH GO & NO-GO GAGE SCT17803 STANDARD CAR TRUCK CO. DRAWING SK-2823 REV NONE |
| W589 | A |
WING WIDTH GO & NO-GO GAGE SCT17803 STANDARD CAR TRUCK CO. DRAWING SK-2824 REV NONE |
| W590 | A |
BOTTOM LENGTH GO & NO-GO GAGE SCT17803 STANDARD CAR TRUCK CO. DRAWING SK-2825 REV NONE |
| W591 | A |
FRICTION FACE TO PIN SLOT GO & NO-GO GAGE SCT17803 STANDARD CAR TRUCK CO. DRAWING SK-2826 REV NONE |
| W592 | A |
CENTER PORTION WIDTH GO & NO-GO GAGE SCT17803 STANDARD CAR TRUCK CO. DRAWING SK-2822 REV NONE |
| W594 | A |
GIB HEIGHT GAGE "AS CAST" BOLSTER POCKET RC SPLIT WEDGE TRUCK STANDARD CAR TRUCK CO. DRAWING SK-2859 REV NONE |
| W595 | A | SLOPE SURFACE CONSTRUCTION GAGE AS CAST BOLSTER POCKETS RC SPLIT WEDGE TRUCKS STANDARD CAR TRUCK CO DRAWING SK-2860 REV NONE |
| W598 | B |
COMBINED TRUCK WEAR GAGE 70 TON LOW LEVEL 5'3" WHEELBASE ASF® MAINTENANCE MANUAL RC 8 2-8510 LINE 3 |
| W599 | B |
COMBINED TRUCK WEAR GAGE 70 TON LOW LEVEL 5'1" WHEELBASE ASF® MAINTENANCE MANUAL RC 8 2-8510 LINE 4 |
|
B |
STEEL
WHEEL GAGE (NF ONLY)
STANDARD S-630-98 |
|
|
B |
LOCOMOTIVE
STEEL WHEEL GAGE (FLANGE THICKNESS IN 1/16") |
|
|
A |
LOCOMOTIVE
STEEL WHEEL GAGE (FLANGE THICKNESS IN 1/16") MODIFIED
TO MEASURE OVERSIZED LOCOMOTIVE WHEELS |
|
|
A |
SEPTA
STEEL WHEEL GAGE FOR M-4 CONTOUR |
|
| W600-4A | C |
SAN DIEGO TROLLEY WHEEL GAGE FOR TIRE RW-6091-T-SLC/D PENN MACHINE DRAWING RW-6091-T-SLC/D |
| W600-5A | A | STEEL WHEEL GAGE (NF) MODIFIED FOR 14 & 16 INCH DIAMETER WHEELS |
| W600-6A | A | STEEL WHEEL GAGE (NF) MODIFIED TO MEASURE POSITIVE FLANGE THICKNESS |
| W600-7A | A |
SAN DIEGO TROLLEY WHEEL GAGE FOR TIRE PM-10892-T SAN DIEGO /S70 TIRE PENN MACHINE DRAWING PM-10892-T |
| W600-9A | C |
SEPTA WHEEL GAGE M4 1B SEPTA DRAWING D-5828 REV D |
|
B |
STEEL
WHEEL GAGE (NF & WF)
STANDARD S-630-98 |
|
|
B |
STEEL
WHEEL GAGE (NF & WF) STANDARD
S-630-98 MODIFIED
TO MEASURE OVERSIZED LOCOMOTIVE WHEELS GENERAL
MOTORS EMD PART NUMBER 40085351 |
|
|
A |
STEEL
WHEEL GAGE (NF & WF) STANDARD
S-630-98 RIM
THICKNESS READS LIKE A REGULAR SCALE (NOT 1/16THS) |
|
|
A |
STEEL
WHEEL GAGE (NF & WF) STANDARD
S-630-98 RIM
THICKNESS READS LIKE A REGULAR SCALE (NOT 1/16THS) MODIFIED
TO MEASURE OVERSIZED LOCOMOTIVE WHEELS |
|
|
A |
AMTRAK
STEEL WHEEL GAGE #1 |
|
|
B |
E-COUPLER
RECONDITIONED GAGE RULE
ONE GAGE 28393 |
|
|
W603 |
|
|
|
W604 |
|
|
|
W608 |
|
|
|
W610 |
|
|
|
A |
SEAT LOCATION AND JOURNAL FILLET GAGE FREIGHT AXLES K (6 1/2 X 9) AAR G-II Figure 5.18 |
|
|
A |
SEAT
LOCATION AND JOURNAL FILLET GAGE AAR G-II Figure 5.18 |
|
|
A |
SEAT
LOCATION AND JOURNAL FILLET GAGE AAR G-II Figure 5.18 |
|
|
A |
SEAT
LOCATION AND JOURNAL FILLET GAGE AAR G-II Figure 5.18 |
|
|
A |
SEAT
LOCATION AND JOURNAL FILLET GAGE AAR G-II Figure 5.18 |
|
|
A |
SEAT
LOCATION AND JOURNAL FILLET GAGE
AMTRAK AXLES D (5 1/2 X 10) AAR G-II Figure 5.18 |
|
A |
SEAT
LOCATION AND JOURNAL FILLET GAGE AAR G-II Figure 5.18 |
|
|
A |
SEAT
LOCATION AND JOURNAL FILLET GAGE |
|
|
A |
AXLE FILLET GAGE G-II Figure 4.11 |
|
|
D |
SIMPLIFIED
WHEEL GAGE AAR
MSRP G
MANUAL RP-615-77 |
|
| W620-1P | E | IMPROVED COMBINED WHEEL GAGE AAR MSRP G Standard S-628 |
| W620-2P | E | IMPROVED COMBINED WHEEL GAGE AAR MSRP G Standard S-627 |
|
E |
AMTRAK
INTERMEDIATE INSPECTION GAGE #1 |
|
|
C |
AMTRAK
INITIAL TERMINAL INSPECTION GAGE #1 |
|
| W620-5 | A | NEC-MSC WHEEL GAGE |
| W620-6 | A | COMBINED WHEEL GAGE MODIFIED FOR 14 & 16 INCH DIAMETER WHEELS |
| W620-7 | A | DAILY WHEEL INSPECTION GAGE TALGO, INC. |
| W620-9 | A | MBTA COMBINED WHEEL GAGE |
| W620-11 | A |
SIMPLIFIED WHEEL GAGE AAR MSRP
G MANUAL RP-615-77 MODIFIED FLANGE CONDEMNING HEIGHT 1.438" |
| W621 | ||
|
A |
AXLE
CENTERING GAGE MSRP G Figure
7 |
|
|
C |
WIDE
FLANGE CONTOUR (FEMALE)
1 IN 20 TAPER Standard
1978 (For Contour
prior to 1B) |
|
|
B |
WHEEL
DEFECT GAGE # 34401
STAINLESS 17-7 HARDENED |
|
|
W625 |
|
|
|
W626 |
|
|
| W627-1 | C | IMPROVED WHEEL DEFECT GAGE ( 7/8 & 15/16) |
| W627-2 | C | IMPROVED WHEEL DEFECT GAGE ( 1 & 15/116) |
| W627-3 | A | UNION PACIFIC LOCOMOTIVE WHEEL DEFECT GAGE |
|
B |
TREAD
WORN HOLLOW CONDEMNING GAGE WITH SHIM |
|
|
W629 |
|
|
|
A |
MIN
FLANGE THICKNESS HEIGHT & THROAT RADIUS GAGE For
Narrow Flange Wheels Standard S-603-72
(For Contour prior to 1B) |
|
|
W631 |
|
|
|
A |
MIN
FLANGE THICKNESS HEIGHT & THROAT RADIUS GAGE For
Wide Flange Wheels Standard S-607-72
(For Contour prior to 1B) |
|
|
A |
MAX
FLANGE THICKNESS HEIGHT & THROAT RADIUS GAGE For
Wide Flange Wheels Standard S-605-71
(For Contour prior to 1B) |
|
|
W634 |
|
|
|
A |
E-COUPLER
NOSE WORN LIMIT GAGE # 44057 |
|
|
A |
F-COUPLER
KNUCKLE NOSE WORN LIMIT GAGE # 49822 |
|
|
D |
ADAPTER
WEAR GAGE FIELD MANUAL RULE
37 |
|
|
B |
F-KNUCKLE
WEAR & STRETCH GAGE # 44250-3 |
|
|
C |
SECOND
HAND & RECONDITIONED ACCEPTANCE GAGE #44250-5 |
|
|
C |
AAR
STANDARD F AND TIGHTLOCK COUPLERS MAINTENANCE & SECOND HAND GAGE #
34101-4 |
|
|
D |
F-COUPLER
GUARD ARM DISTORTION GAGE #36527-2A |
|
|
B |
COUPLER
COMMITTEE GAGE 49354 |
|
|
B |
RECOMMENDED
PRACTICE RP-602-58 (For Contour prior to 1B) |
|
|
B |
RECOMMENDED
PRACTICE RP-603-73 (For Contour prior to 1B) |
|
|
B |
LIMIT
WEAR GAGE STANDARD S-606-71 (For Contour prior to 1B) |
|
|
B |
LIMIT
WEAR GAGE STANDARD S-608-72
(For Contour prior to 1B) |
|
|
W647 |
|
|
|
A |
MIN
MASTER GAGE RECOMMENDED
PRACTICE RP-605-71 (For
Contour prior to 1B) |
|
|
A |
MAX
MASTER GAGE
RECOMMENDED PRACTICE RP-606-72 (For
Contour prior to 1B) |
|
|
B |
MIN
MASTER GAGE RECOMMENDED
PRACTICE RP-607-72 (For
Contour prior to 1B) |
|
|
A |
MAX
& MIN LIMIT GAGE STANDARD
S-604-72 (For
Contour prior to 1B) |
|
|
A |
E
& F COUPLER
RECONDITIONED ACCEPTANCE
GAGE #51236 |
|
|
A |
YOKE
HEAD THICKNESS RECONDITIONED ACCEPTANCE GAGE FOR
BUSHING APPLICATION GAGE #
44246-6 |
|
|
A |
VERTICAL
PIN CONNECTION YOKE RECONDITIONED GAGE FOR HEAD
THICKNESS WITHOUT BUSHING GAGE
NO. 44246-3 |
|
|
W655 |
|
|
|
W656 |
|
|
|
A |
MAX
MASTER GAGE
RECOMMENDED PRACTICE RP-604-71 (For
Contour prior to 1B) |
|
|
D |
NARROW
FLANGE CONTOUR (MALE) 1 IN 40
TAPER FOR AMTRAK FLANGE
PER STANDARDS S-622-78 &
S-623-58 |
|
|
C |
NARROW
FLANGE CONTOUR (FEMALE) 1 IN
40 TAPER FOR
AMTRAK FLANGE PER STANDARDS
S-622-78 & S-623-58 |
|
| W659-1 | B | AMTRAK WHEEL PROFILE ACCEPTANCE GAGE 1 IN 40 TREAD TAPER AND FLANGE CONTOUR PER STANDARD S-622-78 & S-623-58 GAGE DRAWN TO VERIFY CONTOURS SAME AS AAR MSRP G-II Figure 4.310 |
|
A |
PASSENGER WHEEL CONTOUR ACCEPTANCE GAGE |
|
|
C |
AAR
1B WIDE
FLANGE CONTOUR GAGE (MALE) 1
IN 20 TAPER MSRP G Figure 11 |
|
|
B |
MAX
FLANGE THICKNESS GAGE FOR AAR 1B
WIDE FLANGE STANDARD
S-665-91 |
|
|
B |
LIMIT
WEAR GAGE MAX FLANGE THICKNESS AAR 1B
WIDE FLANGE
CONTOUR STANDARD S-666-91 |
|
|
B |
MIN
FLANGE THICKNESS GAGE FOR AAR 1B
WIDE FLANGE STANDARD
S-667-91 |
|
|
B |
LIMIT
WEAR GAGE MIN FLANGE THICKNESS AAR 1B
WIDE FLANGE
CONTOUR STANDARD S-668-91 |
|
|
B |
MAX
FLANGE THICKNESS GAGE FOR AAR 1B
NARROW FLANGE STANDARD
S-661-91 |
|
|
B |
LIMIT
WEAR GAGE MAX FLANGE THICKNESS AAR 1B
NARROW FLANGE
CONTOUR STANDARD S-663-91 |
|
|
B |
MIN
FLANGE THICKNESS GAGE FOR AAR 1B
NARROW FLANGE STANDARD
S-662-91 |
|
|
B |
LIMIT
WEAR GAGE MIN FLANGE THICKNESS AAR 1B
NARROW FLANGE
CONTOUR STANDARD S-664-91 |
|
|
D |
AAR
1B WIDE
FLANGE CONTOUR GAGE (FEMALE) 1
IN 20 TAPER MSRP G Figure 11 |
|
| W669-2 | C |
WHEEL CONTOUR ACCEPTANCE GAGE FOR AAR 1-B NARROW & WIDE FLANGE |
| W669-5 | A | MASTER GAGE FOR W669-2 |
| W669-6 | C | CONTOUR GAGE FOR APTA CONTOUR 140M |
|
B |
AAR
1B NARROW
FLANGE CONTOUR GAGE (MALE) 1
IN 20 TAPER MSRP G Figure 12 |
|
|
D |
AAR
1B NARROW
FLANGE CONTOUR GAGE (FEMALE) 1
IN 20 TAPER MSRP G Figure 12 |
|
| W671-1 | A | 1B NARROW FLANGE WHEEL CONTOUR GAGE 1 IN 40 TAPER AAR MSRP G MANUAL Figure 11 |
| W671-2 | B | 1B NARROW FLANGE WHEEL PROFILE ACCEPTANCE GAGE 1F IN 20 TAPER AAR MSRP G-II Figure 4.31C |
|
A |
COLUMN GIB GAGE ASF T-11 TRUCK BOLSTER 100 TON AMERICAN
STEEL FOUNDRIES DRAWING 1-8239 |
|
|
W673 |
|
|
|
W674 |
|
|
|
W675 |
|
|
|
B |
E-COUPLER
CONTOUR CONDEMNING LIMIT &
E-COUPLER SECOND HAND GAGE # 25623-1
(BOTH SIDES) |
|
|
C |
F-COUPLER
GUARD ARM
DISTORTION GAGE
36527-3 |
|
|
C |
CEILING
WEAR GAGE AAR FIELD MANUAL
RULE 48 SPECIFICATION
M-214 FIGURE 2 EC-1200 |
|
|
E |
ASSEMBLED
TRUCK GAGE 70 & 100 TON
RIDE CONTROL AAR
FIELD MANUAL RULE 88 |
|
| W679-1 | A |
ASSEMBLED
TRUCK GAGE 70 & 100 TON
RIDE CONTROL CSX DRAWING L0626964 |
|
B |
ASSEMBLED
TRUCK GAGE SUPER SERVICE RIDE CONTROL TRUCK
AAR FIELD MANUAL RULE 88 Figure
A-1 |
|
|
C |
F-COUPLER
CONTOUR LIMIT GAGE #47120-2 |
|
|
E |
WHEEL
BACK-TO-BACK SERVICE LIMIT GAGE
MSRP
G-II Figure 5.27 |
|
| W682-1 | A | NEC-MSC BACK-TO-BACK SERVICE LIMIT GAGE |
| W682-2 | A |
BACK-TO-BACK SERVICE LIMIT GAGE 53.1875 GO DIMENSION 53.250 NO-GO DIMENSION PER EMD LOCOMOTIVE SPECIFICATION |
|
A |
BOLSTER
CENTER BOWEL GAGE FOR NEW BOLSTERS EC-1109
(ALTERNATE) |
|
|
B |
INSIDE
BUTT CORNER GAGE # 49371 |
|
|
B |
E
& F
COUPLER YOKE GAGE NO.
49372 |
|
|
A |
E
& F COUPLER YOKE GAGE NO. 49373 |
|
|
A |
E
& F COUPLER YOKE GAGE NO. 49373-2 |
|
|
B |
E/F
& F COUPLER SHANK HEIGHT GAGE NO. 49775-1 |
|
|
B |
E/F
& F COUPLER HEIGHT GAGE NO. 49775-2 |
|
|
B |
E/F
& F COUPLER BUTT WIDTH GAGE NO. 49775-3 |
|
|
C |
E
COUPLER KEY SLOT LOCATION GAGE NO. 49775-4 |
|
|
B |
E
COUPLER SHANK HEIGHT GAGE NO. 49775-5 |
|
|
A |
E/F
& F COUPLER SHANK HEIGHT GAGE NO. 49775-6 |
|
|
C |
KING
PIN LOCKING JAW NO-GO GAGE AAR
MSRP H-III Figure 5.7 |
|
|
W695 |
|
|
|
W696 |
|
|
|
W697 |
|
|