M-214
Side Frame and Bolster Gages

This is an attempt to provide a useful listing of gages available for M-214. An exact, one list fits all is impossible due to the variety of equipment and the variation in re-build processes.


W762 Side Frame Pairing Gage

EC-1120 Side Frame Column "GO" Gage

    ASF RIDE CONTROL & SUPER SERVICE RIDE CONTROL W853

    ASF RIDEMASTER W922

EC-1121 Side Frame Column "NO-GO" Gage

    ASF RIDE CONTROL & SUPER SERVICE RIDE CONTROL W854

    ASF RIDEMASTER W923

1-8989 ASF Side Frame Column Gage Ride Control & Super Service Ride Control W857

1-9011 ASF Side Frame Column Gage Ridemaster W921

SK-1432 Barber Side Frame Column Gage W800

EC-1200 Side Frame Pedestal Roof Wear Limits Gage W678

EC-1086 Transverse Roof Flatness Gage W872

EC-1088 Thrust Lug Width Gage

    Journal Size (4 1/4 X 8) W909-1

    Journal Size (5X9) (5 1/2 X 10) W909-2

    Journal Size (6X11) W909-3

    Journal Size (6 1/2 X 12) W909-4

EC-1089 Longitudinal Roof Flatness Gage W873

    Journal Size (5X9) (5 1/2 X 10) (6X11) (6 1/2 X 12)

EC-1090 W832 is Winchester Industries, Inc. version of EC-1090 and is available

EC-1091 Thrust Lug Height Gage RP-321-91 W211

EC-1100 Longitudinal Roof Flatness Gage W873

    Journal Size (7X12)

EC-1157 Pedestal to Key Slot "GO" Gage W849

RP-321-91 Pedestal Thrust Lug Gage W212

RP-321-91 Pedestal Squareness Gage W889


MEASURING SIDE BEARING CLEARANCE

W761 Lateral Gage (Side Bearing Clearance)

W906 Side Bear Clearance Gage


GAGES FOR CHECKING COMBINED WEAR
OF
ASSEMBLED TRUCK ELEMENTS

W679 LIMIT WEAR GAGE 70 & 100 TON RIDE CONTROL TRUCKS 1-8510 LINE 1

W680 LIMIT WEAR GAGE SUPER SERVICE RIDE CONTROL TRUCKS 1-8510 LINE 2

W598 LIMIT WEAR GAGE 70 TON LOW LEVEL 5' 3" WHEEL BASE 1-8510 LINE 3

W599 LIMIT WEAR GAGE 70 TON LOW LEVEL 5'1" WHEEL BASE 1-8510 LINE 4

W796 COMBINED WEAR OF ASSEMBLED 37 1/2 DEGREE INVERTED BOLSTER POCKET 40 & 50 TON 2-8114-G

W936-1 COMBINED WEAR GAGE 70 & 100 TON RIDEMASTER 1-9009

W936-2 COMBINED WEAR SPECIAL WITH SLOPEGARD SHOES 1992 PRODUCTION ONLY 1-9009

W936-3 COMBINED WEAR GAGE SUPER SERVICE RIDEMASTERÒ 1-9198

W700 BARBER STABILIZER TRUCK GAGE SK-1546-1

W701 BARBER STABILIZER TRUCK GAGE SK-1546-2

W802 BARBER STABILIZER TRUCK GAGE SK-1546-3

W803BARBER STABILIZER TRUCK GAGE SK-1546-4

W816 BARBER STABILIZER TRUCK GAGE SK-1546-5

W817 BARBER STABILIZER TRUCK GAGE SK-1546-6

W983 NATIONAL CASTINGS ASSEMBLED TRUCK GAGE 51554

W984 NATIONAL CASTINGS ASSEMBLED TRUCK GAGE 51555

SHOE HEIGHT GAGES

W842-1 RIDEMASTER SHOE HEIGHT GAGE 1-8881

W842-2 RIDE CONTROL SHOE HEIGHT GAGE 1-8737

W842-3 BARBER MAINTENANCE MANUAL S-2 SHOE HEIGHT GAGE

W842-4 SPECIAL UNION PACIFIC SHOE HEIGHT GAGE

W842-5 SUPER SERVICE RIDEMASTER 1-9199

SPRING GAGES

W287 UNION PACIFIC SPRING LIMIT WEAR GAGE FOR AAR FIELD MANUAL RULE 50

W344 CANADIAN NATIONAL GAUGE #3 SIDE SPRING CONDEMNING GAGE

W823 AAR FIELD MANUAL RULE 50 TRUCK LIMIT WEAR GAGE

W913 BARBER SPRING LIMIT GAGE

W924 ASF RIDEMASTER CONTROL SPRING WEAR LIMIT GAGE

W978 NATION SWING MOTION SPRING GAGE

W993 CONTROL SPRING LIMIT GAGE FOR RIDE CONTROL MINIMUM FREE HEIGHT (USED)


M-214
CENTER BOWL GAGES

These gages were developed by Winchester Industries, Inc. at the request of Mr. Larry Davis of the AAR and submitted to the Truck Manufactures Engineering Committee. The TMEC accepted and provided comments on the gages. The Winchester Industries, Inc. gage drawings contain all the TMEC comments as well as all specifications from M-214.


FOR M-214 BOLSTER CENTER BOWL GAGING REQUIREMENTS,

Bolster Center Bowl Depth GO & NO GO Gage W880
M-214 REPAIR & REBUILD GAGE


Bolster Center Bowl Scrap or Rework Gage W882
M-214 REPAIR & REBUILD GAGE


Bolster Center Bowl NO GO Gage W883
M-214 REPAIR & REBUILD GAGE


BOLSTER DEPTH GAGE WITHOUT WEAR LINER S-308 W1109
BOLSTER DEPTH GAGE WITH WEAR LINER W1110

BOLSTER GIB RESTORATION

ALTHOUGH ALLOWED BY AAR SPECIFICATION M-214 TO RESTORE BOLSTER GIBS TO ORIGINAL CASTING DIMENSIONS, THE MANUFACTURERS RECOMMEND BOLSTERS BE RESTORED TO LATEST STANDARDS USING GAGES FOR GIBS CAST AFTER THE CASTING CHANGE.

EC-1148 Bolster Gib Restoration Gage

    Barber Gib Restoration Gages for castings Before 1987: W780
    Barber Gib Restoration Gages for castings After 1986: W764
    Barber Bolster Gib Restoration Gage S-2-E W507
    ASF Gib Restoration Gages for castings Before 1987: W781
    ASF Gib Restoration Gages for castings After casting change: W862
    ASF Column Gib Gage T-11 Truck Bolster W772

1-8999 ASF Column Gib Gage for 70 & 100 Ton Ride Master W917

EC-1150 This is not a gage but a general reference Dimension Tolerances for Reconditioned Truck Bolsters. See Specification M-214

ADDITIONAL ASF TRUCK GAGES

1-7927 37 1/2 Degree Surface Contour Gage W766

1-8109 37 1/2 Degree Surface Contour Gage (RETIRED) use line 4 of 1-7927 W766

1-9002 ASF 70 & 100 Ton RM 37 1/2 Degree Surface Gage W900

1-8234 ASF 100 Ton –11 41 Degree Surface Contour W845

1-8243 ASF 100 Ton T-11 Column Land Surface Gage W771

1-8985 Pocket Ref. Bolster/Slope Surface Wear Plates W841

1-9025 ASF Pocket Ref. Bolster/Slope Surface Wear Plates W859

1-9031 ASF Pocket Reference RC Lo Lev 5-1 WB 70T W860

1-8986 ASF Inner Column Rotation Stop Gib W855

1-8987 ASF Column guide Land Surface 125T RC Bolster W852

1-8988 ASF Bolster Outer Gib Contour W851

1-8989 ASF Side Frame Column Gage W857

1-8990 ASF Side Frame Column GO Gage W853

1-8991 ASF Column NO GO Gage W854

1-8062 Winged Clearance Gage for Checking Minimum Opening for Repaired ASF Super Service Ride Control and Ride Control Truck Bolsters 70&100 Ton Also 125 Ton Grade C W856

1-9003 ASF Pocket Contour Gage for Ridemaster Bolster 70&100 Ton W933

1-8997 ASF RIDEMASTER Column Outer Land Surface Gage W918

1-9007 ASF RIDEMASTER Bolster Outer Gib Contour Gage W920

1-8998 ASF RIDEMASTER Column outer Land Surface Gage W919

1-8999 ASF RIDEMASTER Column Gib Gage W917

1-8062 Winged Clearance Gage for Checking Minimum Opening for Repaired ASF Super Service Ride Control and Ride Control Truck Bolsters 70&100 Ton, Also 125 ton Grade C W856

 97707 GO and NO-GO gage Narrow Pedestal 100 ton Side Frame ASF Drawing 97707 Rev L W568

 99207 Thrust lug width GO gage for Roadmaster retro-fit pedestal side frame W567

ADDITIONAL BARBER TRUCK GAGES

SKX-699 Barber Split Wedge Bolster Pocket Construction Gage
W767-1, W767-2, W767-3, W767-4, & W767-5

SK-1482A Barber Bolster Pocket Sidewall Restoration Gage
LOWER W798-1
UPPER W798-2

SK-1483A OBSOLETE REPLACED BY SK-2547 W557

SK-1503-1 Barber Side Frame Column Restoration Gage W801-2
Journal Size (50 Ton Regular) (70 Ton Low Conv) (50 Ton Wide Land)

SK-1503-4 Barber Side Frame Column Restoration Gage W801-1
Journal Sizes (70 & 100 Ton Regular) (70 & 100 Ton Wide Land) & (100 Ton Combination)

SK-1560 Barber 125 Ton Side Frame Column Restoration Gages W828-1 & W828-2

SK-1594 Friction Casting Condemning Gage W892

SK-1595 Friction Casting Condemning Gage W893

SK-1689 Barber Pocket Restoration Gage W765

SK-1754 Barber Elevation Gage 915-SW Insert W967

SK-1766 Barber Pocket Restoration Gage W976

SK-1781 OBSOLETE REPLACED BY SK-2142 W991

SK-1902 OBSOLETE REPLACED BY SK-2142 W991

SK-2034 OBSOLETE REPLACED BY SK-2142 W991

SK-2042 Barber Elevation Gage for 945-SW Insert

SK-2044 Barber Side Wall Restoration Gage
Lower Restoration W506-1
Upper Restoration W506-2


SK-2045 Barber 925-SW Split Wedge Condemning Gage W404-2

SK-2046 Barber Split Wedge Condemning Gage Cross Bar Used with
905-SW, 915-SW, 925-SW, & 955-SW W403-1

SK-2050 Barber 915-SW Split Wedge Condemning Gage W404-1

SK-2054 Barber 905-SW Split Wedge Condemning Gage W404-3

SK-2058 Barber 955-SW Split Wedge Condemning Gage W404-4

SK-2062 Barber 945-SW Split Wedge Condemning Gage W404-5

SK-2063 Barber Split Wedge Condemning Gage Cross Bar Used With
945-SW & 965-SW W403-2

SK-2065 Barber Pocket Insert Condemning Gage 945-SW Split Wedge W505

SK-2142 Side Wall Restoration Gage W991

SK-2165 Barber Elevation gage 965-SW Insert W429

SK-2264 Bolster Gib Restoration Gage S-2-E W507

SK-2265 Side Frame Column Repair Gage for S-2-E W508

SK-2270 Barber 965-SW Split Wedge Condemning Gage W404-6

PENNSY GAGES

W457-1 SLOPE TEMPLATE
SPLIT WEDGE TRUCK DROP-IN WORN POCKET ACCEPTANCE GAGE PN 2048

W457-2 POCKET WIDTH TEMPLATE
SPLIT WEDGE TRUCK DROP-IN WORN POCKET ACCEPTANCE GAGE PN 2048

W767-1 SPLIT WEDGE BOLSTER POCKET CONSTRUCTION GAGE
MODEL RA 70 & 100 S-2-A, B & C

W767-2 RETROFIT TEMPLATE
MODEL RAD3 70 & 100 TON S-2-A(609)

W767-3 RETROFIT TEMPLATE
MODEL RA50 BOLSTER 50

W767-4 RETROFIT TEMPLATE
MODEL RA50A BOLSTER 50

W767-5 RETROFIT TEMPLATE
MODEL RA50B BOLSTER 70 S-2-B LOW LEVEL

W767-6 RETROFIT TEMPLATE
MODEL RAWP NEW 100 & 70 TON S-2-B OR C

W770-1 SPLIT WEDGE INSERT APPLICATION GAGE
MODEL RB BOLSTER 70 & 100 S-2-A, B & C

W770-2 SPLIT WEDGE INSERT APPLICATION GAGE
MODEL RB50 BOLSTER 50

W770-3 RETROFIT TEMPLATE
MODEL RB50A BOLSTER 50

W770-4 RETROFIT TEMPLATE
MODEL RB50B BOLSTER 70 TON S-2-B LOW LEVEL

W770-5 RETROFIT TEMPLATE
MODEL RBD3 BOLSTER 70 & 100 TON S-2-A(609)

W790-1 SPLIT WEDGE WELD CLEARANCE TEMPLATE “RC”

W963 BOLSTER PREPARATION TEMPLATE
MODEL HCA1 100 HD & MODEL HCA2 125 HD

W964 BOLSTER PREPARATION TEMPLATE
MODEL HCA3 100 S-2-D & MODEL HCA4 100 HD (9 COIL)

W965 INSERT APPLICATION TEMPLATE
MODEL HCB1 BOLSTER 100 HD & MODEL HCB2 BOLSTER 125 HD

W966 INSERT APPLICATION TEMPLATE
MODEL HCB3 BOLSTER 100 S-2-D

NATIONAL SWING MOTION

INSTRUCTIONS GOVERNING
INSPECTION, MAINTENANCE AND RECLAMATION
CIRCULAR NO. 5075-D

REFERENCE AUTHORITY:
ABC-NACO TECHNOLOGIES


TRUCK INSPECTION PRIOR TO DETRUCKING FROM CAR

  • W983 Gage No. 51554
  • W984 Gage No. 51555

FRICTION WEDGE SPRINGS

CONDEMNING LIMIT FOR PERMANENT SET

CONDEMNING LIMIT FOR PERMANENT SET OF DUAL RATE SPRING

ROCKER SEATS AND ROCKER BEARINGS

  • W985 Gage No. 51932
  • W986 Gage No. 51933

BOLSTER WEDGE POCKET

COLUMN WEAR PLATES

  • W982 Gage No. 51934

BOLSTER END SIDES

TRUCK ASSEMBLY

  • W981 Gage No. 49706-1

Can we help you with your gaging needs?